Main Menu
Your Cart

Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)

Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)
Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)
Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)
Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)
Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)
Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)

Description: Dr. Pulley makes some of the best performing variators, clutches, and roller weights in the world. This Dr. Pulley HiT Clutch will maximize your stock or racing Yamaha Vino, Yamaha Zuma, and various other make and model 125. The HiT clutch utilizes the push pin technology to create a more responsive clutching action, higher throttle response, and a more powerful mid-range for hills and racing.

The Dr. Pulley HiT Clutch Racing Tune Bell Set comes with a racing HiT Clutch, 6-Star Bell, nut locker star, washers, four sets of each pillow springs, and clutch springs for fine-tuning. The Dr. Pulley HiT Clutch with pillow springs is for use on four-wheel CVT vehicles or scooters with a daily driving RPM. Results from using this clutch include decreased slippage and improved transmission efficiency.

NOTE: Works in conjunction with Dr. Pulley Variator 117.5mm Set, sold separately (Part# 1200-1206). Downloadable Dr. Pulley HiT Clutch Diagram.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Bell, Clutch, Clutch springs, Pillow springs, Nut locker, and Shims.

•    1x Clutch ID: 34mm / OD: 115mm
•    3x Clutch Weights (shoes)
•    2x 3 Clutch Springs (SP1532407095-BL, 6.5kg)
•    1x 3 Clutch Springs (SP1632007095-BK, 10kg)
•    1x 3 Clutch Springs (SP1832565105-RD, 10kg)
•    1x 3 Clutch Springs (SCG2032007104-BK, 14.5kg)
•    3x Plastic Clutch Shims 45.5x56mm
•    1x Stainless Nut Locker Star 24x28mm
•    3x Pillow Angle° (plates)
•    1x 3 Pillow Springs (SP1832565105-RD, 10kg)
•    2x 3 Pillow Springs (SP2032365103-YL, 20kg)
•    1x 3 Pillow Springs (SP2031565103-PK, 25kg)
•    1x 3 Pillow Springs (SCG2231806108-RD, 27kg)
•    1x Iron Clutch Bell (6-Spokes) Splines: 16 / ID: 15mm / OD: 133mm
•    Made in Taiwan
•    Fit Clutch Sheave41mm / Bearing Funnel: 42mm / Nut: M28 / Socket: 19mm46mm
•    Fit Belt Size: 759-22-30 (Vino)
•    Fit Belt Size790.5-21.9810-22-28 (Zuma)
•    Fit Clutch Springs: 1k1.5k2k rpm
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit BWS 125
•    Fit Vino 125
•    Fit Zuma 125

Supported Models: NCY CVT KIT (Part# 1200-1047); Asia/European model Cygnus 125, Yamaha BW's 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125.

-----
Item Weight & Product Dimensions:
•    1.969 pounds | 4.711" (OD) x 2.623" (ID) x 1.464" (H)
•    1.844 Pounds | 4.527" (OD) x 4.9" (ID) x 1.710" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Dr. Pulley HiT Clutch Racing Tune Bell Set (Vino, Zuma 125)
  • Stock: 40
  • Reward Points: 11
  • Part #: 1200-1205
Sold: 0
Views: 6421
$299.00
Price in reward points: 299

Included