Main Menu
Your Cart

Uni Breather Filter 5/16in Clamp-On (UP-101)

Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)
Uni Breather Filter 5/16in Clamp-On (UP-101)

Description: Uni-versal air filter is where it all started over 45 years ago. High-Quality Female "Clamp-On" Breather Filter made by UNI. Make the world’s best quality filter that clamps directly to the crankcases and differentials. UNI's signature red urethane foam to give your scooter that race-ready look. Also, for use on air compressors, go-karts, motorcycles, snowmobiles, tractors, anything with crankcase ventilation can benefit from a Uni Breather Filter. It’s superior dirt capturing capabilities and its capacity to be easily cleaned and reused. Also, available clamp-ons 3/8" and 1/2" size options. The 5/16" and 3/8" Uni Filter Clamp-On Breathers paired along with the PK-22 Air Filter (Part# 230-64) will allow you to eliminate the stock airbox on your Honda Ruckus 50cc!

NOTE: Uni's Breathers are made of a washable urethane that needs no oil or special cleaners. Not legal for sale or use on California pollution-controlled vehicles. For off-road use only.

Features:

•    Better Flowing than Paper Elements
•    Clamp-On Model for Remote Mounting
•    Lifetime Guarantee Against Defects Material / Workmanship
•    New Uni Washable Urethane Material
•    No Oil or Special Cleaners Required
•    Unaffected by Moisture or Gasoline

Specifications:

Includes the following Breather filter and Clamp.

•    Filter OD: 38mm (1.496 in.)
•    Filter Length: 41mm (1.6 in.)
•    Filter Open: 8mm (0.313 in.)
•    Foam Layer: Red
•    Stainless Steel Clamp: 6-12mm
•    Urethane Flange Straight: 0°
•    Washable \ Reusable
•    Made in the U.S.A.
•    Fit Vent Port 6mm-10mm
•    Fit DIO 49/90cc+
•    Fit QMB 49/50cc+

Supported Models: Honda Dio AF16 AF18E 50, Elite 50, Kymco ZX, SYM, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, and virtually any engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.05 pounds | 1.6" (L) x 1.496" (W) x 0.313" (H)

Specifications
Features• Better Flowing than Paper Elements • Clamp-On Model for Remote Mounting • Lifetime Guarantee Against Defects Material / Workmanship • New Uni Washable Urethane Material • No Oil or Special Cleaners Required • Unaffected by Moisture or Gasoline
Includes• Filter OD: 38mm (1.496 in.) • Filter Lenght: 41mm (1.6 in.) • Filter Open: 8mm (0.313 in.) • Foam Layer: Red • Stainless Steel Clamp: 6-12mm • Urethane Flange Straight: 0° • Washable \ Reusable
NotesUni's Breathers are made of a washable urethane which needs no oil or special cleaners. Not legal for sale or use on California pollution-controlled vehicles. For off-road use only.
Supported Models
DIOHonda Dio AF16 AF18E 50, Elite 50
QMBGY6 40QMB 50cc 2-stroke
QMF50QMF 90cc-100cc
KymcoKymco ZX
Others makes/modelsSYM, and virtually any engine with these measurements.
Product Dimensions
(L) x (W) x (H)1.6" (L) x 1.496" (W) x 0.313" (H)
Company
Made In (COO)The U.S.A.
Mfg. WarrantyYES

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Uni Breather Filter 5/16in Clamp-On (UP-101)
  • Stock: 37
  • Part #: UP-101
Sold: 4
Views: 28583
$14.95
Price in reward points: 15

Included