Main Menu
Your Cart

Intake Manifold


Carburetor Attribute:
1.    Air Control Valve
2.    Auto Enricher (choke)
3.    Auto Enricher Cap
4.    Binder Wire Holder
5.    Carburetor
6.    Carburetor Body
7.    Carburetor Top Cover
8.    Compression Spring
9.    Diaphragm
10.    Float
11.    Float Bowl Assembly
12.    Float Bowl Gasket
13.    Float Drain Screw
14.    Float Drain Valve
15.    Fuel Inlet Valve
16.    Fuel Line 1/4" x 3/8”
17.    Hose Clamps 3/8”
18.    Hose Clamps 5/16”
19.    Idle Adjustment Screw, Spring, Washer

20.    Idle Jet 35#
21.    Idle Mixture Screw, Spring, Washer, and O-ring
22.    M4x8 Screws
23.    M4x8 Washer-Screws
24.    M4x10 Washer-Screws
25.    M4x14 Screws
26.    M5x12 Screws
27.    M5x12 Washer-Screws
28.    Main Jet 112#
29.    Needle
30.    Needle Jet
31.    Needle Jet Holder
32.    Oil Injector Line 2x6
33.    O-ring Set
34.    Pivot Pin
35.    Throttle Connection Bracket
36.    Vacuum Line 3/16” x 5/16”
37.    Valve Plate Unit
38.    Vent Line 1/8" x 1/4"


Scooter intake manifolds offer a smooth bore and larger inlet diameter over the stock. Combined, these two assets allow more air and more fuel into your cylinder, giving you more power.

Brand: 101-Octane Part #: 155-24
Description: 101-Octane Reed Valve Assembly for Kymco 49/50cc, and Sym 49/50cc scooters with horizontal cylinders 2-stroke engines. Replacement Kymo OEM# 14100-KEB7-900Specifications:Includes the following Reed valve assembly, and Reed petals.•    1x Reed Valve Assembly L: 76.8mm..
$29.95
Brand: Ban Jing Part #: 169-519
Description: Ban Jing Replacement Rubber Intake Boot for PWK carburetors from 19mm to 30mm. Suitable for intake manifolds that use a bolt-on rubber coupler with 60mm bolt spacing.Specifications:Include the following intake manifold boot.•    Bolt Hole Spacing: 60mm•    ..
$12.95
Composimo Intake Clocking Flange 15° Angle (GY6)
Non-Stock
Brand: ComposiMO Part #: CPSM-ACF1321
Description: Composimo Intake Clocking Flange 15° Angle for GY6 125/150cc 4-stroke engines. Running a forward-facing carb, and having problems with how high the carburetor sits? Some carbs have a problem when angled too high in the front, and this can cause the engine to not run right, and have..
$38.35
Brand: DOPPLER Part #: 231775
Description: Doppler Reed Valve S2R Assembly for Minarelli and 1E40QMB Minarelli clone 2-stroke engines.Includes the following Reed valve assembly, and Reed petals.•    1x Reed Valve Assembly L:  / W:  / H: mm•    2x Fiberglass Reed Petals•    Made i..
$57.59
Brand: DOPPLER Part #: 365159
Description: Doppler Reed Valve S3R Assembly for Minarelli and 1E40QMB Minarelli clone 2-stroke engines.Includes the following Reed valve assembly, Reed petals, and Gasket set.•    1x Reed Valve Assembly L:  / W:  / H: mm•    2x Carbon Fiber Reed Petals•  ..
$68.75
Brand: G Part #: 122-69
Description: Breather Pipe Gasket 12mm for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Breather pipe gasket.•    1x Breather Pipe Gasket L: 48.5mm / ID: 12mm / W: mm / H: mm• ..
$0.79
Brand: G Part #: 122-66
Description: Camshaft Cover Gasket for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Camshaft cover gasket.•    1x Camshaft Cover Gasket ID: 94mm / OD: 97.2mm / Thickness: 3.2mm•  &n..
$2.95
Brand: G Part #: 122-67
Description: CVT Air Duct Gasket Left for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Air duct gasket.•    1x Air Duct Gasket ID: 123mm / OD: 126mm / Thickness: 3mm•    F..
$1.45
Brand: G Part #: 122-32
Description: Intake Manifold 32mm with 1 Vacuum Point for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Features:Includes the following Intake manifold, Clamps, Fittings, and O-ring.•    1x Cast Aluminum Intake Manifold / PTFE Co..
$24.95
Brand: G Part #: 151-228
Description: Intake Manifold Gasket 18mm for 139QMB 49/50cc 4-stroke engines.Specifications:Include the following Intake manifold gasket.•    1x Fiber Intake Manifold Gasket L: 58mm / ID: 18mm / W: 38mm / H: 0.7mm•    Bolt-to-Bolt Space: 45mm•    Fit..
$1.99
Brand: G Part #: 164-328
Description: Intake Manifold Gasket 21.5mm for GY6 125/150cc 4-stroke engines.Specifications:Include the following Intake manifold gasket.•    1x Intake Manifold Gasket L: 60mm / ID: 21.5mm / W: 38mm / H: 0.7mm•    Bolt-to-Bolt Space: 44mm•    Fit CV..
$1.99
Brand: G Part #: 164-167
Description: Intake Manifold Gasket 23.5mm for GY6 125/150cc 4-stroke engines.Specifications:Include the following Intake manifold gasket.•    1x Fiber Intake Manifold Gasket L: 60mm / ID: 23.5mm / W: 38mm / H: 0.7mm•    Bolt-to-Bolt Space: 45mm•    ..
$1.99
Brand: G Part #: 122-65
Description: Intake Manifold Insulator 30mm for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models. Specifications:Includes the following Intake manifold insulator.•    1x Intake Manifold Insulator L: mm / ID: 30mm / W:..
$3.95
Brand: G Part #: 151-8
Description: Intake Manifold O-Ring for 139QMB 49/50cc 4-stroke engines. Specifications:Include the following O-ring only.•    1x Rubber O-ring ID: 21.15mm / OD: 25mm / H: 1.75mm•    Fit QMB 49/50cc+Supported Models: 139QMB 49cc-50cc engines, Baja SC50, Boreem..
$2.95
Brand: G Part #: 164-170
Description: Intake Manifold O-Ring for 139QMB 49/50cc and GY6 125/150cc 4-stroke engines with 26mm+ intake manifold.Specifications:Include the following Rubber o-ring.•    1x Rubber O-ring ID: 27mm / OD: 31mm / H: 2mm•    Fit GY6 125/150cc+•    Fit QMB 4..
$2.95
G- Intake Manifold O-Ring 31mm (CFMoto, GY6) G- Intake Manifold O-Ring 31mm (CFMoto, GY6)
Non-Stock
Brand: G Part #: 1100-1105
Description: Intake Manifold O-Ring for CFMoto 3V/5V 250cc 172mm and GY6 125/150cc 4-stroke engines. Fit most GY6s' Ban Jing, NCY, Taida Intake Manifold 28-32mm sizes. Also, maybe use in other applications.Specifications:Include the following O-ring.•    1x Rubber O-ring ID: 31mm / OD..
$2.95
Brand: G Part #: 122-72
Description: Intake Manifold O-Ring 35mm for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following O-ring.•    1x Rubber O-ring ID: 35mm / OD: 37mm / H: 2mm•    Fit Aprilia 250cc+•..
$2.95
Brand: G Part #: 122-71
Description: Intake Manifold O-Ring 36mm for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following O-ring.•    1x Rubber O-ring ID: 36mm / OD: 39.5mm / H: 3.5mm•    Fit Aprilia 250..
$1.45
Brand: G Part #: BT13877
Description: Intake Manifold Spacer 6mm with O-Ring for 139QMB 49/50cc 4-stroke engines. This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals properly.Specifications:Includes the following Intake ma..
$7.95
Brand: G Part #: GY14647
Description: Intake Manifold Spacer 6mm aka intake manifold insulator for GY6 125/150cc 4-stroke engines. Also, it's made of a special heat wear-resistant nylon why it's called an "insulator" to help keep your aluminum intake manifold much cooler from not transfer the heat from the cylinder hea..
$4.75
Brand: G Part #: 139-5
Description: Reed Valve for Minarelli and 1E40QMB Minarelli clone 2-stroke engines.Specifications:Include the following Reed valve.•    1x Reed Valve L:  / W:  / H: mm•    Fit QMB 49/50cc+•    Fit DIO 49/50cc+•    Fit&nb..
$14.49
Brand: G Part #: 161-124
Description: Reed Valve Assembly for Minarelli and 1E40QMB Minarelli clone 2-stroke engines.Specifications:Includes the following Reed valve assembly, and Reed petals.•    1x Reed Valve Assembly L: 58.75 / W: 52.75 / H: 39.5mm•    2x Metal Reed Petals•    Made..
$18.95
Brand: Koso Part #: 128-14
Description: Koso Intake Manifold 30.5mm for Honda Grom, Honda Monkey 125cc.Features:Includes the following Intake manifold, Clamps, and Gasket.•    1x Cast Aluminum Intake Manifold / PTFE Coated•    1x Vacuum Port ID: mm / OD: mm•    1x Manifold Gasket I..
$71.95
Brand: Malossi Part #: 028479B
Description: Malossi Intake Manifold NBR 27mm for Minarelli Vertical 50cc 2-stroke scooters. Its diameter allows the use of the following carburetors while keeping the original air filter. 12 to 17,5 Dell'orto PHVA, 19 to 21 Dell'orto PHBG, 15 to 21 Polini CP (with air ..
$53.55
Brand: Malossi Part #: 2711796.C0
Description: Malossi Reeds Petals Carbon MHR VL14. These two reed versions are suitable for Malossi's VL14 reed valve. Depending on the angle of the carbon fibers (45 or 90deg), you can influence your engine's characteristics. Both sets have a thickness of 0.3mm.Include the following Reed ..
$29.55
Showing 1 to 25 of 62 (3 Pages)