Ban Jing Drive Face Fan Forged (GY6)
Description: Ban Jing lightweight forged variator drive face for 150cc and 125cc 4-stroke GY6 engine based scooters, ATVs, and off-road karts. Color available: Blue, Gold, and Red.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following Drive face fan.
• 1x Forged Drive Face Fan Weight: 154gm / OD: 115mm / H: 18mm
• Splines: 19 / ID: 14.1<15mm / H: 7mm
• Color Choice: Blue, Gold, Red
• Made in Taiwan
• Fit Dowel Pin Set (8x14mm)
• Fit Belt Size: 743, 835, 842
• Fit 54mm Stud Spacing (A-Block)
• Fit 57mm Stud Spacing (B-Block)
• Fit GY6 125/150cc+
Supported Models: Ban Jing CVT KIT (Part# 169-500); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento
Item Weight & Product Dimensions:
• 0.339 pounds | 4.527" (L) x 4.527" (W) x 0.708" (H)