Dr. Pulley Variator Slide Set (Malaguti, Majesty, Italjet 250)
Description: Dr. Pulley Variator Slide Set for Malaguti Madison 250, Yamaha Majesty 250, and Italjet Jupiter 250. The slide pieces in the variator are equally as important as the rollers. It is highly recommended to change the slide pieces to coincide with the rollers. The Dr. Pulley Variator Slides are made of the same abrasion-resistant nylon as the Dr. Pulley Roller Weights, which promises a long life.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
• 3x Plastic Slides
• Made in Taiwan
• Fit Malaguti 250
• Fit Majesty 250
• Fit Italjet 250
Supported Models: Malaguti Madison 250, Yamaha Majesty 250, Italjet Jupiter 250, and various unlisted makes/models.
Item Weight & Package Dimensions:
• 0.005 pounds | 2" (L) x 1.5" (W) x 0.2" (H)