Main Menu
Your Cart

Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)

Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)

Description: Expect better performance from your scooter, period. No matter what stage you are in upgrading your scooter, simply add Dr. Pulley Sliding Weights and a kevlar belt for a power upgrade. Dr. Pulley Sliding Weights are the most advanced weights available. These sliding weights perform better than standard round weights by allowing the variator to open farther for higher top speeds, and last longer with less performance material loss. The weights have several unique features such as their composite material containing nylon for better performance.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Features:

•    Broadens your range of gear ratios
•    Fastest Sliding Weights available
•    High-Temperature Resistance
•    Increases acceleration and re-acceleration properties
•    Increases top-end speed
•    Lasts longer than standard roller weights
•    Low Friction Coefficient (low wear)
•    No abrasive fibers (glass fiber or carbon fiber)
•    Suitable for aluminum variator housing

Specifications:

•    8x Sliding Weights: 20x12mm 5gm<15gm
•    U.S. Patent Number: 7,276,004
•    Material: SL-9T, SL-9TS (oil-less PA46)
•    Made in Taiwan
•    Fit Variator Housing: 117.5mm or 122mm / Slides: 3 Top: 89mm / Boss: 20mm / Shims: 20mm / Drive Splines: 15
•    Fit Belt Size: 759-22-30 (Vino)
•    Fit Belt Size790.5-21.9810-22-28 (Zuma)
•    Fit BWS 125
•    Fit Vino 125
•    Fit Zuma 125

Supported Models: NCY CVT KIT (Part# 1200-1047); Kymco 300, Yamaha Linhai 260/300, Asia/European model Cygnus 125, Yamaha BW's 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125

-----
Item Weight & Package Dimensions:
•    0.092~0.531 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Dr. Pulley Variator Sliding Weight Set 20x12 (Vino, Zuma 125)
  • Stock: 40
  • Reward Points: 1
  • Part #: 1200-1117
Sold: 54
Views: 7432
$29.00
Price in reward points: 29

Included