G- CVT Belt 856-23-30 (Aprilia, Linhai)

Description: CVT Belt 856-23-30 for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.

Specifications:

Include the following one belt.

•    Nylon Reinforced Material
•    Length: 856mm 
•    Top Width: 23mm (0.905 in.) 
•    Groove Angle: 30º
•    Heat and Oil Resistant 
•    Made in Japan
•    Fit Aprilia 250cc+
•    Fit Linhai 250cc+
•    Fit VOG 260cc+

Supported Models: Aprilia Leonardo 250, Aprilia   Leonardo 300, Benelli Velvet 250, CF Moto V3/V5, Diamo Turista, Italjet Jupiter 250, JCL, VOG 260, Linhai Aeolus, Linhai ATV 260, Linhai Tank 260, Tank Touring 250DE, Malaguti Madison 250, Malaguti Password 250, MBK Kilibre 300, MBK Skyliner 250, Renault Kouranos 250, Roketa MC-54 250B, Xingyue VOG 260, Yamaha Majesty 250 (mod. 1999), Yamaha Majesty 250 and various unlisted makes/models

-----
Item Weight & Product Dimensions:
•   0.29 pounds | 17.145” (L) x 0.874” (W) x 0.354” (H)