Main Menu
Your Cart

G- Drive Face Fan 115mm (GY6)

G- Drive Face Fan 115mm (GY6)
G- Drive Face Fan 115mm (GY6)
G- Drive Face Fan 115mm (GY6)
G- Drive Face Fan 115mm (GY6)

Description: Drive face fan 115mm for GY6 125/150cc+ engines. This drive face fan is a replacement stock for your CVT components.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Drive face fan.

•    1x Aluminum Drive Face Fan Weight: 170gm / OD: 115mm / H: 26.6mm
•    Splines: 19 / ID: 13.5mm<15mm / H: 7mm
•    Fit Variator Housing: 114mm or 115mm / Weights: 18x14mm / Slides: 3 Top: 87mm / Boss: 24mm / Shims: 24mm
    Fit Variator/Clutch Shaft Nuts: M12 / Washers: M12 / Socket: 17mm
•    Fit Belt Size: 743835842-20-30
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+

Supported Models: NCY CVT KIT (Part #1200-1048); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    0.375 pounds | 4.527" (L) x 4.527" (W) x 1.047" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
G- Drive Face Fan 115mm (GY6)
  • Stock: 36
  • Part #: 1100-1143
Sold: 5
Views: 2407
$12.95
Price in reward points: 13

Included