Gates CVT Belt 759-22-30 PL30807 Premium (Yamaha Vino 125)
Description: Gates Powerlink Premium CVT Drive Belt size 759x22x30 is made in China by the U.S.A. Company Standard. Its material used is EPDM (Ethylene Propylene Diene Monomer) used in making automotive and construction for its excellent resistance to environmental factors such as weather and heat resistant up to 130°C (266°F). EPDM strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. EPDM makes it gentle on CVT recommended for everyday riding use. Standard fit for Yamaha Vino 125cc 4-stroke scooters.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Poly Reinforcement Cords / CR Construction
• Length: 759mm (Loop 14.940 in.)
• Width: 22mm (0.866 in.)
• Height: 9mm (0.354 in.)
• Groove Angle: 30°
• Heat and Oil Resistant
• U.S.A. Company / manufactured in CHINA
• Fit 10" Rear Wheel Shortcase Engine
• Fit 54mm Stud Spacing (A-Block) - shortcase
• Fit 57mm Stud Spacing (B-Block) - shortcase
• Fit GY6 125/150cc+
Supported Models: NCY CVT KIT (Part# 1200-1047); Yamaha Vino 125, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.25 pounds |14.940” (L) x 0.866” (W) x 0.354” (H)