Gates CVT Belt 835-20-30 PL30705 Premium (GY6 longcase)
GY6 longcase length: 17-7/8 inches
Description: Gates Powerlink Premium CVT Drive Belt size 835x20x30 is made in China by the U.S.A. Company Standard. Its material used is EPDM (Ethylene Propylene Diene Monomer) used in making automotive and construction for its excellent resistance to environmental factors such as weather and heat resistant up to 130°C (266°F). EPDM strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. EPDM makes it gentle on CVT recommended for everyday riding use. Standard fit for GY6 150cc 4-stroke ATVs and Street Scooters with 12 or 13-inch rear wheel longcase engine.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
NOTE: If the distance from the center of the variator nut to the center of the clutch nut is 11", then you would use an 835 belt (most if not all Chinese long case 150cc engines). Another way to determine if you have a GY6 shortcase or longcase engine? If it has 10 bolts securing CVT cover and measures horizontal 17.875" across the CVT cover it a longcase which uses an 835-CVT belt. If it has 8 bolts securing CVT cover and measures horizontal 16.142" across the CVT cover its a shortcase that uses a 743-CVT belt.
Include the following one belt.
• Poly Reinforcement Cords / EPDM Construction
• Length: 835mm (Loop 15.837 in.)
• Width: 20mm (0.787 in.)
• Height: 9mm (0.354 in.)
• Groove Angle: 30°
• Heat and Oil Resistant
• U.S.A. Company / manufactured in CHINA
• Fit 12" or 13" Rear Wheel Longcase Engine
• Fit 54mm Stud Spacing (A-Block) - longcase
• Fit 57mm Stud Spacing (B-Block)- longcase
• Fit GY6 125/150cc+
Supported Models: GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento
Item Weight & Product Dimensions:
• 0.231 pounds | 16.437” (L) x 0.787” (W) x 0.354” (D)
People Also Bought
From Same Category
- Stock: 38
- Reward Points: 1
- Part #: PL30705