NCY Clutch Gen 4 Performance Green (GY6, PCX)

ZNEN Scooter NCY CVT KIT GY6 courtesy photo by Anthony Myers

Description: High-quality, NCY Clutch Gen 4 Performance Green for use in GY6 125cc-150cc+, Honda PCX 125-150cc (2010 and newer), and many others. This is the upgraded version of the blue, third-generation racing clutch (Part# 1200-1159).

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Clutch housing, Clutch springs, and Clutch weights.

•    1x Clutch ID: 24.3<28mm / OD: 121.8mm / H: 36.85mm
•    3x Clutch Springs (red): 2000 RPM
•    3x Clutch Weights (green)
•    Made in Taiwan
•    Fit Clutch Slider: 34mm / Nuts: M12, M28 / Washer: M12 / Bearing Funnel: 43mm / Bell Spline: 19 / Socket: 17mm, 19mm, 39mm
•    Fit Compression Spring: 1k, 1.5k, 2k rpm
•    Fit Clutch Springs: 1k, 1.5k, 2k rpm
•    Fit Belt Size: 743, 835, 842-20-30 (Fit GY6 ONLY)
•    Fit Belt Size: 816, 836-22-30 (Fit PCX ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+
•    Fit PCX 125/150cc+

Supported Models: NCY CVT KIT (Part# 1200-1048); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Honda PCX 125/150cc (2010 and newer), Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    2.225 pounds | 4.795" (L) x 4.795" (W) x 1.450" (H)