Main Menu
Your Cart

NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)

NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)
NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)
NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)
NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)
NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)
NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)

Description: One of the fundamental upgrades you can make to your scooter is swapping out the clutch springs for ones that will give you more acceleration off the line. The different colors are different stiffness's to allow you to dial in your scooter to just the way you like it. These springs are great for the beginning tuner or the advanced looking for more control over the performance of their scooter. NCY clutch pressure spring 1000 RPM uses a modified alloy spring providing better resilience and above-average strength for Yamaha Vino, Zuma 125, and many other 125/150cc base engines. Get better acceleration on your Yamaha Vino, Zuma 125 by upgrading your clutch springs!

NOTE: Before use, lubricate slider grooves, slider pins, ball bearing seat, and inner funnel area with heat-resistant moly-graphite grease.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Clutch spring set.

•    3x Clutch Springs (blue): 1000 RPM 
•    Spring L: 12.7mm / ID: 6.6mm /  OD: 10.4mm
•    Hook-to-Hook Overall L: 31.75mm
•    Made in Taiwan
•    Fit Clutch: 115.84mm Sheave41mm / Bearing Funnel: 42mm / Nut: M28 / Socket: 19mm46mm / Bell Spline16
•    Fit Belt Size: 759-22-30 (Vino)
•    Fit Belt Size790.5-21.9810-22-28 (Zuma)
•    Fit Clutch Springs: 1.5k2k rpm
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit BWS 125
•    Fit Vino 125
•    Fit Zuma 125

Supported Models: NCY CVT KIT (Part# 1200-1047); Benelli Velvet 125, Italjet Millennium 125, Malaguti Madison 125, Yamaha BWS 125, Yamaha Cygnus 125, Yamaha Vino 125, Yamaha Zuma 125

-----
Item Weight & Product Dimensions:
•    0.025 Pounds | 1.25" (L) x 0.409" (OD) x 0.259" (ID)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Clutch Spring 1000 RPM Set (Vino, Zuma 125)
  • Stock: 39
  • Part #: 1200-1006
Sold: 22
Views: 4237
$9.95
Price in reward points: 10

Included