NCY Throttle 7/8in Cam Type (Yamaha Zuma 50)
Description: NCY Throttle 7/8" Aluminum Alloy Cam Type color. Aluminum throttle tube with black housing. 22mm with 4 cable mounting positions and tension adjuster. For most scooters and motorcycles with 7/8 inch handlebars. Compatible with CVK and PWK carburetors.
NOTE: If throttle cable becomes dry (non-lube). Recommend using lubricating grease, oil, or WD-40 before use. This also helps ease cable friction wear and tear in throttle cable's sleeves, use lubricating tools to help grease where inner throttle sleeve and cable inside line ONLY.
Recommended use hairspray to help ease of rubber grip set slide onto the handlebar left-side and onto the throttle sleeve right-side. Hairspray will allow it to tack dray in minutes, thus allowing grip usage after 10-15 minutes applied. Or if available use an air-compressor wedge to open a tiny air pocket in front of the rubber grip while pressing from behind the grip to slide onto or off the handlebar and onto or off the throttle sleeve without the use of chemicals.
• Rt Alum-Alloy Throttle L: 129.1mm (5.08”) / ID: 22.66mm / OD: 25.73<52.85mm
• Rt Alum-Alloy Cam Housing L: 23.34mm (0.92") / ID: 21.48<35mm / OD: 60<75mm
• Color Options: Black\Chrome
• Made in Taiwan
• Fit Handlebar OD: 22mm (7/8”)
• Fit Zuma 50cc
Supported Models: Zuma 50, and virtually any other scooter with these handlebar measurements.
Item Weight & Product Dimensions:
• 0.306 Pounds | 5.08" (L) x 0.846" (ID) x 2.953" (OD)
From Same Category
- Stock: 40
- Reward Points: 2
- Part #: 0800-1068