NCY CVK Throttle Cable 76in (QMB, GY6, Universal)
Description: High-Quality NCY replacement throttle cable for 139QMB 49/50cc, GY6 125/150cc+, Honda Ruckus, and many other models of GY6-based Chinese scooters.
If you need a longer CVK throttle cable due to that Honda stretch this is it can be used on Honda ruckus with a CVK carburetor. We recommend that you measure the original cable and check the detailed photos for accuracy.
NOTE: If throttle cable becomes dry (non-lube). Recommend use lubricating grease, oil, or WD-40 before use. This also helps ease cable friction wear and tear in throttle cable's sleeves, use lubricating tools to help grease where inner throttle sleeve and cable inside line ONLY.
Recommended use hairspray to help ease of rubber grip set slide onto the handlebar left-side and onto the throttle sleeve right-side. Hairspray will allow it to tack dray in minutes, thus allowing grip usage after 10-15 minutes applied. Or if available use an air-compressor wedge open a tiny air pocket in front of the rubber grip while pressing from behind grip to slide onto or off the handlebar and onto or off the throttle sleeve without the use of chemicals.
Include the following CVK carburetor throttle cable.
• 1x CVK Throttle Cable L: 76" (6ft 4in)
• Blue Sleeve L: 69" / Overall Cable L: 81"
• Made in Taiwan
• Fit CVK Carburetor
• Fit QMB 49/50cc+
• Fit GY6 125/150cc+
Supported Models: GY6 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, 152QMI 125cc, 157QMJ 150cc, 161QMK 170cc, 161QML 200cc, Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, TaoTao, Vento, and virtually any other GY6-based engine with these measurements.
Item Weight & Package Dimensions:
• 0.493 pounds | 8.4" (L) x 6.75" (W) x 1.746" (H)
People Also Bought
From Same Category
- Stock: 32
- Reward Points: 1
- Part #: 0800-1015