NCY Throttle Grip 7/8in Bearing Style Set (GY6, Ruckus, Universal)
Description: Ditch your plastic-on-plastic throttle tube set up for this performance needle-bearing throttle tube. NCY Throttle Grip 7/8" Bearing Style Set comes with an aluminum throttle tube, your choice of color housing, and a comfortable rubber grip feel every time. 22mm with 4 cable mounting positions and tension adjuster. This throttle tube assembly works on any scooter with 7/8" diameter bars. Not for dual throttle cable setup. Compatible with CVK and PWK carburetors.
NOTE: If throttle cable becomes dry (non-lube). Recommend use lubricating grease, oil, or WD-40 before use. This also helps ease cable friction wear and tear in throttle cable's sleeves, use lubricating tools to help grease where inner throttle sleeve and cable inside line ONLY.
Recommended use hairspray to help ease of rubber grip set slide onto the handlebar left-side and onto the throttle sleeve right-side. Hairspray will allow it to tack dray in minutes, thus allowing grip usage after 10-15 minutes applied. Or if available use an air-compressor wedge open a tiny air pocket in front of the rubber grip while pressing from behind grip to slide onto or off the handlebar and onto or off the throttle sleeve without the use of chemicals.
Include the following handlebar grip throttle set.
• 1x Lt Grip L: 121.2mm (4.7") / ID: 21.2mm / OD: 35<48.56mm
• 1x Rt Grip L: 117.5mm (4.6") / with Throttle L: 133.2mm (5.2”) / ID: 22.4<31mm / OD: 36.2<52.6mm
• 1x Rt Cam Housing L: 23.34mm (0.92") / ID: 21.48<35mm / OD: 60<75mm
• Housing Colors (choose one): Black, Golden, Gray, Orange, Red
• 1x Allen Bolt A2: M5x0.8x16mm w/Nut: M5x0.8x4mm
• 2x Allen Bolts A2: M5x0.8x20mm
• Made in Taiwan
• Fit Handlebar OD: 22mm (7/8”)
• Fit GY6 125/150cc+
• Fit QMB 49/50cc+
• Fit GET 49/50cc+
Supported Models: 139QMB, GY6, Honda Ruckus, Zuma, Rattler, and virtually any other scooter with these handlebar 7/8” measurements.
Item Weight & Package Dimensions:
• 0.781 pounds | 7.5" (L) x 5.5" (W) x 2.3" (H)