NCY Variator 95mm (Aprilia, JOG, Zuma 50)
Description: The ultimate variator for your Aprilia, JOG, Zuma CW50, and Zuma 50F transmission! This beauty is lighter than any other variator on the market weight at 6oz. and at 95mm outer diameter drive face is ideal for all types of riding.
NOTE: NCY Variator Ramp Top (Sold Separately, Part# 1200-1039). Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Variator housing.
• 1x Alumin-Alloy Housing ID: 21mm / OD: 95mm / H: 26.67mm / W: 187.1gm
• Made in Taiwan
• Fit Variator Weights: 15x12mm / Slides: 3 / Top: 79.3mm / Boss: 20mm / Shims: 18mm / Drive Spline: 15
• Fit Belt Size: 818-19-28 (Fit Aprilia ONLY)
• Fit Belt Size: 788-17-30 (Fit JOG ONLY)
• Fit Belt Size: 748-18-28 (Fit Zuma ONLY)
• Fit Aprilia 50
• Fit JOG 50
• Fit Zuma 50
Supported Models: NCY CVT Kit (Part# 1200-1197); Yamaha C3, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino Minarelli Jog engines, Chinese Yamaha Clones 1PE40QMB 1E40QMB engines, Malaguti, CPI, Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303, and Peirspeed Scooters.
Item Weight & Product Dimensions:
• 0.412 pounds | 3.732" (OD) x 0.826" (ID) x 1.05" (H)
People Also Bought
- Stock: 39
- Part #: 1200-1040