Main Menu
Your Cart

NCY Variator Slide Set (DIO, GET, QMB)

NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)
NCY Variator Slide Set (DIO, GET, QMB)

Description: NCY Variator Slide Set for Honda DIO and 139QMB 4-stroke engines. The Slide Pieces in the variator are equally as important as the rollers. It is highly recommended to change the slide pieces to coincide with the rollers. The NCY Variator Slides are made of the same abrasion-resistant nylon as the NCY Roller Weights, which promises a long life.

Compatible with CVT unit on the market work on Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Variator slides.

•    3x Plastic Variator Slides ID: 5.5<7mm / L: 10.29mm / W: 13.73mm / H: 6.4mm
•    Color: Red
•    Made in Taiwan
•    Fit Variator Housing: 88mm89mm or 95mm Weights: 16x13mm / Boss: 20mm / Shims: 20mm
    Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
•    Fit Belt Size: 654669-18-30 (Fit DIO ONLY)
•    Fit Belt Size: 660-18-28 (Fit Metro ONLY)
•    Fit Belt Size: 785-18-30 (Fit Ruckus ONLY)
•    Fit Belt Size: 669729, 788-18-30 (Fit QMB ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit DIO 49/90cc+
•    Fit GET 49/50cc
•    Fit QMB 49/50cc+

Supported Models: NCY CVT Kit (Part# 1200-1171); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.004 pounds | 0.54" (L) x 0.405" (W) x 0.251" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Variator Slide Set (DIO, GET, QMB)
  • Stock: 18
  • Part #: 1200-1186
Sold: 28
Views: 10327
$3.95
Price in reward points: 4

Included