Stage6 Clutch Bell Wing Cooler Reinforced R/T 107mm (DIO, GET, QMB)
Description: Stage6 Clutch Bell Wing Cooler Reinforced R/T 107mm for 139QMB 49cc-50cc 4-stroke GY6 50 engine-based scooters, ATVs, and off-road karts. Stage6 R/T (Racing Team) is the newest HighEnd product range from Stage6. These parts are designed in collaboration with our Stage6 Racing Team, this way obtaining technologically innovative and sophisticated products ideal for race use. And the results in IDSM races and other international events certainly prove us right. Now we have extended our product range to include this clutch bell. One of its most interesting features is the welded-on torsional ring that doesn't only optimize torque characteristics but also provides better cooling. The air fins already known from the Stage6 clutch bells have been kept.
Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Clutch Bell.
• Clutch Bell (5-Spokes) Vented ID: 107mm / OD: 114.7mm / H: 34.6mm
• Splines: 22 / ID: 11<12mm / OD: 16.95mm / H: 17.75mm
• Made in Italy
• Fit Clutch Nut: M28 / Socket: 39mm
• Fit Clutch: 107mm / Shaft: 155mm / Slider: 33.5mm / Pins: 6mm / Nut: M10 / Washer: M10 / Bearing Funnel: 43mm / Socket: 14mm
• Fit Belt Size: 660-18-28, 785-18-30 (Fit GET ONLY)
• Fit Belt Size: 669, 729, 788-18-30 (Fit QMB ONLY)
• Fit Belt Size: 654, 669-18-30 (Fit DIO ONLY)
• Fit Compression Spring: 1k, 1.5k, 2k rpm
• Fit Clutch Springs: 1k, 1.5k, 2k rpm
• Fit Dowel Pin Set (8x10mm)
• Fit DIO 49/90cc+
• Fit GET 49/50cc
• Fit QMB 49/50cc+
Supported Models: TFC CVT KIT (Part# 179-2); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.
Item Weight & Product Dimensions:
• 0.737 Pounds | 4.515" (OD) x 4.212" (ID) x 1.362" (H)
People Also Bought
From Same Category
- Stock: 39
- Reward Points: 3
- Part #: S6-5514003-T