Stage6 Cylinder R/T MKI 47.6mm 70cc LC Kit (Aprilia, Piaggio, Vespa 50)
Description: Stage6 Cylinder R/T MKI 47.6mm 70cc LC Kit for Aprilia, Piaggio 50, Vespa 2-stroke engines. The cylinder that has been breaking records! It set new best times in the Italian Open Cup and also broke the 6-second barrier in scooter drag racing. Regarding transfer port layout, Stage6 has maintained GP standards, refraining from cross-section reducing 7- or 8-port designs. After all, “more” isn’t necessarily “better”. The 47.6 mm bore conforms to the rules of most 70cc racing classes. The patented modular construction allows for quickly mounting the cylinder to different engines using adaptors. Sealing between the adaptor plate and cylinder is realized via a Viton® O-ring; this makes the tedious cleaning of sealing surfaces and replacing gaskets unnecessary. Once the adaptor plate has been mounted and adjusted via gaskets, it won’t have to be readjusted later. The CNC-milled adaptor plate bolts to the engine case and accepts the cylinder via the external studs. The construction of the R/T 70cc cylinder doesn’t use any continuous studs, so the design of exhaust and transfer ports isn’t subject to the restrictions that conventional racing cylinders face, and further tuning and porting reserves are available. Particular attention has also been paid to the cylinder’s thermal properties. The CNC-milled inner cylinder head is bolted at five points, each of them thermally stabilized by its own cooling pocket. Thus the critical areas at the studs that tend to lead to piston seizures have been eliminated. The flange firmly connects the cylinder to the exhaust via three bolts, minimizing the leakage of fuel residues. Fitting flanges are available for all common racing exhausts, and do-it-yourself kits can also be supplied. The kit includes an exhaust flange that fits the Stage6 R/T exhaust and installation instructions. Attention: In order to be able to install the cylinder, it is necessary to open up the crankcase to 56.7 mm. In case of loss or defect of mounting parts, please use STRICTLY Stage6 replacement parts, as failure to do so may result in damage beyond repair!
Includes the following Cylinder, Base gasket, Piston, Rings, Piston pin, Circlips, Cylinder head, Head gasket, Exhaust gasket, Exhaust studs, and Intake studs.
1. Includes Liquid Cooled Cylinder 47.6mm, Piston + Rings, Gaskets (base gasket, steelhead gasket), Wrist pin, and Circlips.
• 1x Cast-Alumin Piston: 47.6mm
• 1x Piston Rings: 47.6mm
• 1x Wrist Pin w/G-clips: mm x mm x mm
• 1x Cast-Iron Cylinder: 47.6mm
• Outer Sleeve Diameter: mm
• Overall Height (w/sleeve): 85mm
• Cylinder Height (w/o sleeve): mm
2. Includes Cylinder Head 47.6mm, Valve Assembly.
• 1x Cylinder Head Stud Space: 47.6mm / H: mm / Intake Port: mm / Exhaust Port: mm
• Overall Height (w/valves) H: mm
• Cylinder Height (w/o valves): mm
• 2x Intake Studs
• 2x Exhaust Studs
• Made in Italy
• Fit Aprilia 49/50cc
• Fit Piaggio 49/50cc
• Fit Vespa 49/50cc
Supported Models: Aprilia Mojito 50, Aprilia SR 50 Funmaster LC, Aprilia SR 50 LC, Aprilia SR 50 Racing, Aprilia Scarabeo 50 AC, Aprilia Sportcity Street 50, Derbi Atlantis 50 AC, Derbi Bullet 50 AC, Derbi GP150 LC, Derbi GP10pen 50, Gilera DNA 50 LC, Gilera Ice 50 AC, Giler Runner 50, Gilera Stalker 50, Gilera Storm 50, Giler Typhoon 50, Italjet Torpedo 50 AC, Piaggio Fly 50 AC, Piaggio NRG 50 LC, Piaggio Storm 50, Piaggio Typhoon 50 AC, Piaggio Vespa S 50, Piaggio Zip Base 50, Vespa ET2 50 AC ZAPC 16000, Vespa LX 50 AC 2-Stroke, Vespa LXV 50 2-stroke AC, Vespa Primavera 50 2T and virtually any other scooter engine with these measurements
Item Weight & Product Dimensions:
• 1.456 Pounds | 4.567" (L) x 4.275" (W) x 2.776" (H)
• 2.193 Pounds | 5.227" (L) x 5.323" (W) x 2.598" (H)
- Stock: 40
- Reward Points: 16
- Part #: S6-7514001