Main Menu
Your Cart

Stage6 Roller Weight Tuning Kit 15x12 (Aprilia, JOG, Zuma 50)

Stage6 Roller Weight Tuning Kit 15x12 (Aprilia, JOG, Zuma 50)
Stage6 Roller Weight Tuning Kit 15x12 (Aprilia, JOG, Zuma 50)
Stage6 Roller Weight Tuning Kit 15x12 (Aprilia, JOG, Zuma 50)
Stage6 Roller Weight Tuning Kit 15x12 (Aprilia, JOG, Zuma 50)

Description: Stage6 Roller Weight Tuning Kit 15x12 for Aprilia, JOG, and Zuma 50 2-stroke engines. The set consists of 4x6 cores and shells made of very wear-resistant plastic that is not affected by temperature changes. The shells are of course also available as spare parts. For better identification, the individual rollers have the weight printed on them, so mixing them up (as it can happen with other sets) becomes impossible. The set comes in a shatter-proof box.

NOTE: These kits are for tuning only and are not intended for permanent use.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Roller weights and Shell set.

•    12x Wear-Resistant Plastic Shell Size: 15x12mm
•    24x Brass-Gold Core Weights (choose set): 4/ech. 6 core weights
•    1x Plastic Compartment Case
•    Fit Belt Size: 818 (Fit Aprilia ONLY)
•    Fit Belt Size: 788 (Fit JOG ONLY)
•    Fit Belt Size: 784.5 (Fit Zuma 50 ONLY)
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Dowel Pin Set (8x14mm)
•    Fit Aprilia 50
•    Fit Jog 50
•    
Fit Zuma 50

Supported Models: NCY CVT KIT (Part# 1200-1197); Yamaha C3, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino Minarelli Jog engines, Chinese Yamaha Clones 1PE40QMB 1E40QMB engines, Malaguti, CPI, Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303, and Peirspeed Scooters.

-----
Item Weight & Product Dimensions:
•   0.5 pounds | 9.5" (L) x 6" (W) x 0.655" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Stage6 Roller Weight Tuning Kit 15x12 (Aprilia, JOG, Zuma 50)
  • Stock: 20
  • Reward Points: 1
  • Part #: S6-GS15001
Sold: 0
Views: 423
$26.39
Price in reward points: 27

Included