Taida Cylinder 61mm 171cc 2V Forged Big Bore Kit Trio Combo Fit 54mm (GY6)
Description: High-Quality Taida Cast-Iron Cylinder 61mm 171cc with Forged Aluminum Piston offers better durability and reduced friction for GY6 125/150cc + engines. The cylinder bore is 61mm. Taida Cylinder Big Bore Kit Trio Combo 61mm 171cc 2V w/Forged Piston Fit 54mm including the following parts Taida 61mm (171cc) cylinder kit with forged piston, Taida oversize 2V head 28/23, and Taida 54mm rocker arm set. Taida Cylinder Big Bore Kit Trio Combo 61mm 171cc 2V is suitable for all air-cooled 4-strokes; 125-150cc Kymco engines (scooters), and most Chinese imported vehicles GY6 125/150cc (scooters, quads, and buggies).
NOTE: The Taida Cylinder 61mm Jug will NOT work on Genuine Buddy 125 (see NCY Part# 1100-1287). Also, please measure with a caliper GY6 crankcase bore (opening) for 62.7mm cylinder outer diameter sleeve need a minimum of 62.9mm bore clearance or boring and machining are required.
100% Taida Products – NO SUBSTITUTE.
• 1x Forged-Alumin Piston: 61mm*
• 5x Piston Rings (installed): 61mm Thick: ||mm
• 1x Wrist Pin w/G-clips: 36mm x 15mm
• 1x Cast-Iron Cylinder 61mm
• Outer Sleeve Diameter: 62.7mm
• Cylinder Height (w/o sleeve): 69.3mm
• Overall Height (w/sleeve): 90mm
2. Includes Taida Cylinder Head 61mm 2V NON-EGR, Valves Assembly, Gaskets (manifold spacer +gasket, steel exhaust gasket), intake\exhaust studs, nuts, and Taida Sticker.
• 1x Cylinder Head Stud Space: 54mm / H: 60mm / Intake Port: 26.5mm / Exhaust Port: 25mm
• 2x Valves: 28x66mm Intake / 23x65.6mm Exhaust / Stem: 5mm / (w/intake valves) H: 67<69.3mm
• 1x Plastic Intake Manifold Spacer L: 58mm / ID: 28mm / W: 38mm / H: 5.15mm
• 1x Paper Intake Manifold Gasket L: 58mm / ID: 28mm / W: 38mm / H: 1mm
• Intake Manifold Gasket Bolt-to-Bolt Space: 45mm
• 2x Intake Studs: M6x62mm
• 1x Exhaust Gasket L: 68mm / ID: 27mm / W: 45.15mm / H: 1.9mm
• Exhaust Gasket Bolt-to-Bolt Space: 45<51mm
• 2x Exhaust Studs: M8x35mm
• 2x Exhaust Nuts: M12x8mm
3. Includes Taida Rocker Arm 2V Assembly
• 1x Rocker Arm Holder
• 1x Rocker Arm +Shaft (inlet)
• 1x Rocker Arm +Shaft (outlet)
• 2x Valve Adjusting M5x0.50mm Tappets
• 2x Valve Adjusting M9x5mm Nuts
• Made in Taiwan
• Fit Chain Guide (standard)
• Fit Cam Chain 45 (90) links
• Fit Crankshaft 57.8mm +3mm
• Fit Stud Set- 187mm 195mm
• Fit 54mm Stud Spacing (A-Block)
• Fit Dowel Pin Set (10x14mm)
• Fit GY6 125/150cc+
• Optional: cut plastic fan shroud for best fitment
CORRECTION: piston "EX" smaller valve indent should be facing down toward the exhaust. This means the entire piston engrave 61mm and the Taida Star symbol would be upside-down NOT like the video shown. We did this for the reading aesthetic of what piston size/brand installed. *New designed, now come aesthetically upright Taida Star symbol and it's marked "IN" piston near indent should face up (intake).
Supported Models: GY6 152QMI 157QMJ Chinese Scooter, ATV, Genuine Buddy 150, Kymco, Ruckus, Vento.
Item Weight & Product Dimensions:
• 2.931 pounds | 5.5" (L) x 4.972" (W) x 3.582" (H)
• 2.318 pounds | 5.804" (L) x 5.313" (W) x 2.728" (H)
• 0.528 pounds | 4.457" (L) x 2.875" (W) x 1.062" (H)
- Stock: 30 - 45 Days
- Reward Points: 14
- Part #: GY6-090-2V54-171-TRIO