Taida Cylinder 61mm 171cc Big Bore Kit w/Cast Piston Fit 54mm (GY6)
NOTE: The Taida Cylinder 61mm Jug will NOT work on Genuine Buddy 125 (see NCY Part# 1100-1287). Also, please measure with a caliper GY6 crankcase bore (opening) for 62.7mm cylinder outer diameter sleeve need a minimum of 62.9mm bore clearance or boring and machining are required.
Specifications:
Includes the following Cylinder, Piston + Rings, Gaskets (chain tensioner gasket, Hi and Low compression base gaskets, steelhead gasket), Wrist pin, Circlips, and Taida Sticker.
• 1x Cast-Alumin Piston: 61mm*• 5x Piston Rings (installed): 61mm Thick: 1|1|2mm
• 1x Wrist Pin w/G-clips: 48.5mm x 15mm
• 1x Cast-Iron Cylinder: 61mm
• Outer Sleeve Diameter: 62.7mm
• Cylinder Height (w/o sleeve): 69.3mm
• Overall Height (w/sleeve): 90mm
• Made in Taiwan
• Fit Intake Studs: M6 / Nuts: M6 / Socket: 10mm
• Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 12mm
• Fit Cylinder Studs: 187.5mm 195.5mm / Nuts: M8 / Washers: M8 / Side Bolts: M6 / Socket: 8mm-12mm
• Fit 54mm Stud Spacing (A-Block)
• Fit 54mm Rocker Arm 2V Assembly
• Fit Crankshaft 57.8mm +3mm
• Fit Dowel Pin Set (10x14mm)
• Fit Cam Chain 45 (90) links
• Fit Chain Guide (standard)
• Fit 54mm Cylinder Head 58.5mm to 61mm 2V
• Fit GY6 125/150cc+
• Optional: cut plastic fan shroud for best fitment
Supported Models: GY6 Crankcase (Part# 1100-1418); GY6 152QMI 157QMJ Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento
-----
Item Weight & Product Dimensions:
• 2.937 pounds | 5.5" (L) x 4.972" (W) x 3.582" (H)