Main Menu
Your Cart

TFC Clutch Bell 10-Spokes Forged V1 Silver (GY6, PCX)

TFC Clutch Bell 10-Spokes Forged V1 Silver (GY6, PCX)
ETA 4 - 10 Days

Description: TFC Clutch Bell 10-Spokes Forged V1 Silver for GY6 125/150cc 4-stroke engine-based scooters, ATVs, Honda PCX, and off-road karts.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Clutch bell.

•    1x Iron Clutch Bell (10-Spokes) Vented ID: 125mm / OD: 136mm / H: 43.6mm
•    Splines: 19 / ID: 13.5>15mm / OD: 20mm / H: 25.45mm

•    Made in Taiwan
    Fit Clutch: 120mm / Slider: 34mm / Nuts: M12M28 / Washer: M12 / Bearing Funnel43mm / Socket: 17mm19mm39mm
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Clutch Springs: 1k1.5k2k rpm
•    Fit Belt Size: 743835842-20-30 (Fit GY6 ONLY)
•    Fit Belt Size: 816836-22-30 (Fit PCX ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+
•    Fit PCX 125/150cc+

Supported Models: TFC CVT KIT (Part# TFC-012); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Honda PCX 125/150cc (2010 and newer), Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    1.481 Pounds | 5.358" (OD) x 4.908" (ID) x 1.720" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
TFC Clutch Bell 10-Spokes Forged V1 Silver (GY6, PCX)
  • Stock: ETA 4 - 10 Days
  • Reward Points: 6
  • Part #: TFC-009
Sold: 3
Views: 9350
$151.00
Price in reward points: 151

Included