Bando CVT Belt 787-18.2-30 (Ruckus NPS50)
Description: Bando Brand Premium CVT Drive Belt size 787-18.2-30 is made in Japan, not China's version. Its material used is Nylon previously used in making bulletproof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. Nylon makes it gentle on CVT recommended for everyday riding use. CVT Drive Belt size 787-18.2-30 commonly found on Honda Ruckus NPS50 '03-'11.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Nylon Reinforced Material
• Length: 787mm (Loop 15.492 in.)
• Top Width: 18.2mm (0.717 in.)
• Groove Angle: 30º
• Made in Japan
• Fit NPS50
Supported Models: NCY CVT Kit (Part# 1200-1220); Honda Ruckus 50 NPS50 (2003-2011), Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.237 pounds | 15.492” (L) x 0.717” (W) x 0.354” (D)
People Also Bought
From Same Category
- Stock: 36
- Part #: 106-112