Main Menu
Your Cart

Hoca Crankshaft +2.5mm Stroker (GY6)

Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Non-Stock
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)
Hoca Crankshaft +2.5mm Stroker (GY6)

Description: Hoca Crankshaft 57.8mm +2.5mm Stroker Crank increases standard stroke by 2.5mm more displacement equals more power for GY6 125/150cc+ 4 Stroke!

Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the Hoca Crankshaft bearing side will be placed, in order to immediately fit the frozen crankshaft bearing, seating flush in place. Users assume full responsibility and risk doing so using this Hoca Crankshaft.

Specifications:

Include the following Crankshaft stroker.

•    1x Crankshaft L: 285mm / Stroke L: 57.8mm +2.5mm (2500-micron) = 60.3mm
•    1x Piston Wrist Pin Slot ID: 15mm
•    1x Flywheel Shaft Thread: M12 x 16mm
•    1x Flywheel Shaft Bearing: 56mm x 22mm x 15mm
•    1x Variator Shaft Thread: M12 x 16mm
•    1x Variator Shaft Splines: 19
•    1x Variator Shaft Bearing: 56mm x 22mm x 15mm
•    Made in Taiwan
•    Fit Intake Studs: M6 / Nuts: M6 Socket: 8mm
•    Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 10mm
    Fit Flywheel/Variator Shaft Nuts: M12 / Washers: M12 / Socket: 17mm
•    Fit Starter Clutch / Nut: M22 / Washer: M22 / Castle Socket: 28.7<37.6mm
•    Fit Cylinder Studs: 187.5mm 195.5mm 2V / Nuts: M8 / Washers: M8 / Socket: 12mm
•    Fit 54mm Stud Spacing (A-Block)
•    Fit 57mm Stud Spacing (B-Block)
•    Fit Dowel Pin Set (
8x14mm)
•    Fit Dowel Pin Set (10x14mm)
•    Fit Woodruff Keys
•    Fit GY6 125/150cc+
•    Optional: cut plastic fan shroud for best fitment

Supported Models: GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    6.4 pounds | 11.5" (L) x 5.25" (W) x 4.75" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Hoca Crankshaft +2.5mm Stroker (GY6)
  • Stock: Non-Stock
  • Reward Points: 6
  • Part #: 169-47
Sold: 12
Views: 40490
$172.00
Price in reward points: 173

Included