Malossi

Description: Malossi Air Filter E13 42-50-60mm. Too often we neglect the simplest and fullest sight components of our engine, whereas we could allow it to work better, to give better performances, and to be more long-lived, with little operations. Let's consider for instance the feeding sy..

Description: Malossi Carburetor PHBG MHR 21mm with Foam Filter for Yamaha Zuma 2-stroke as well as 2-stroke scooters from manufacturers such as Aprilia, Malaguti, Derbi, and any use with 70-90cc scooters and mopeds.Features:•    Manual Choke•    PWK Cable/Top 90°Angle Pull L..

Description: Malossi Carburetor Top 90° Angle for replacement angled carb top for use with CP, PHBG, and PWK type carburetors. The angled throttle cable fitting on this top helps when space is a concern or extreme cable angles are causing binding.Specifications:Include the following Carburetor ..

Description: Malossi CDI Injtronic for Piaggio and Vespa 50. The Injtronic engine control unit is the natural evolution of the original Piaggio system and enhances vehicle performance. The latest generation 32-bit microprocessor and hardware designed according to the most recent automotive qual..

Description: Malossi Clutch Bell MHR 107mm for 139QMB and Piaggio engine-based scooters. Malossi Wing Bell 2010 with self-cleaning bores and enlarged gaps for better cooling properties. The outer cooling ribs have been kept unchanged; they still do a great job of keeping down the temperatu..

Description: Malossi Clutch Maxi Delta for use in GY6 125cc-150cc+, Honda PCX 125-150cc (2010 and newer), and many others. This clutch features a spring preload adjustment that allows you to fine-tune the RPM at which the arms release and engage.  To adjust the preload, you loosen the Allen bol..

Description: Malossi CVT Kevlar Belt 745-16.6-28 are known for their high stability and temperature duration, which prevents slipping or snapping under the most demanding situations. Its material used is Aramid aka “Kevlar” which is used in making bullet-proof vests. Aramid characteri..

Description: Malossi CVT Cover for Aprilia, Piaggio 50, Vespa 50 2-stroke engines. The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force, the new engine crankcase compatible with C-One, RC-One, and the original Piaggio extended crankcase. It's called Ai..

Description: Malossi CVT Cover w/ Kick Start for Aprilia, Piaggio 50, Vespa 50 2-stroke engines. The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force, the new engine crankcase compatible with C-One, RC-One, and the original Piaggio extended crankcase. ..

Description: Malossi Cylinder 52mm 88cc Big Bore Kit w/Cast Piston in aluminum with hard chromed liner for 139QMB 49/50cc 4-stroke Chinese Scooter. The bore = 87.9cc capacity. The original head may be retained according to the manufacturer, but only super unleaded should be used due to the..

Description: Malossi Engine 70cc C-One for Minarelli. Malossi has taken the design of performance parts to the next level. Please see below to know what parts are included in the kit. The introduction of their Malossi Crankcase Kit C-One has revolutionized scooter tuning by presenting inno..

Description: Malossi Engine 94cc RC-One for Minarelli. Malossi has taken the design of performance parts to the next level. Please see below to know what parts are include in the kit. The introduction of their Malossi Crankcase Kit RC-One has revolutionized scooter tuning by presenting inn..

Description: Malossi Gear Cover MHR Aprilia, Piaggio, Vespa 50 2-stroke engines. Malossi is pleased to announce two new gear-box covers for scooters and Piaggio 50 cc engines, designed for racing and for a sport upgrade of standard production scooters. Malossi, after revisiting the gear bo..

Description: Malossi Gear Set 13*48 for Aprilia, Piaggio and Vespa 50. Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new H.t.q. gears were designed and bu..

Description: Malossi Grease MHR High-Temp Lubricate Clutch Variator. The new MALOSSI 7.1 MHR Grease, recommended for use in extreme conditions or with operating temperatures up to 160° C. Malossi 7.1 Malossi Grease is recommended for the lubrication of scooter variators and rear ..

Description: Malossi Intake Manifold NBR 27mm for Minarelli Vertical 50cc 2-stroke scooters. Its diameter allows the use of the following carburetors while keeping the original air filter. 12 to 17,5 Dell'orto PHVA, 19 to 21 Dell'orto PHBG, 15 to 21 Polini CP (with air ..

Description: Malossi Primary Gear 14*39 Kit for Aprilia, Piaggio 50, Vespa 2-stroke engines. Malossi S.p.A. is pleased to offer its new series of final transmission gears for scooters and maxi scooters. These new gears were created by exploiting our 20-year experience in designing and buil..

Description: Malossi Primary Gear 15*38 Kit for Aprilia, Piaggio 50, Vespa 2-stroke engines. Malossi S.p.A. is pleased to offer its new series of final transmission gears for scooters and maxi scooters. These new gears were created by exploiting our 20-year experience in designing and buil..

Description: Malossi Reeds Petals Carbon MHR VL14. These two reed versions are suitable for Malossi's VL14 reed valve. Depending on the angle of the carbon fibers (45 or 90deg), you can influence your engine's characteristics. Both sets have a thickness of 0.3mm.Include the following Reed ..

Description: Malossi Reed Valve Assembly for Aprilia, Piaggio 50, Vespa 2-stroke engines. Racing reed assemblies feature an optimized inlet diameter and a gasflowed shape. The Racing reed has a lower flowing resistance than the standard one thus allowing a larger volume of fresh mixture to..

Description: Malossi Spark Plug Cap Rubber.  Insulated spark plug cap. Made of anti-vibration rubber with excellent insulation.Specifications: Includes the following Spark plug casing.•    1x Spark Plug Cap Rubber L: mm / ID: mm+ / OD: mm•    Made in ItalySupp..

Description: Malossi Spark Plug Cap with Rubber Cable.Specifications:Include the following Spark plug cap. and Cable.•    1x Spark Plug Cable Solid Terminal Socket L: mm / ID: mm / OD: mm•    Made in ItalySupported Models:  Various unlisted makes/models.-----I..

Description: Malossi Sticker Set on a large sticker sheet A3 size (420mm x 297mm) from Malossi with different sizes, easy peel-n-apply, stickers from the same sheet as the iconic Malossi lion logo, MHR logo, etc.Specifications:Include the following Maloss..

Description: Malossi Variator 95mm Multivar Set for Metropolitan, Honda Ruckus 49/50cc 2-Stroke Scooters. The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package is a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wid..