Malossi CVT Belt 745-16.6-28 Kevlar (Aprilia, Zuma 50)
Description: Malossi CVT Kevlar Belt 745-16.6-28 are known for their high stability and temperature duration, which prevents slipping or snapping under the most demanding situations. Its material used is Aramid aka “Kevlar” which is used in making bullet-proof vests. Aramid characteristics reduce belt stretching and stress that can adversely affect the quality of belt engraving performance while preserving long belt life. Recommend for heavier duty off-road application. A MUST for the serious tuner or daily rider of Aprilia and Zuma 50.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Replaces Yamaha OEM Belts: 4VP(5FA)17641-00, 4VP-17641-00, 5FA-17641-00
• Aramid Bullet Proof Vest Reinforced Material
• Length: 745mm (Loop 14.665 in.)
• Top Width: 17.5mm (0.653 in.)
• Groove Angle: 28º
• Heat and Oil Resistant
• Made in Vietnam
• Fit Aprilia 50
• Fit Zuma 50
Supported Models: Aprilia SR 50/ Scarabeo 50, Italjet Dragster, Malaguti F12/ F15/ Phantom, Minarelli, Yamaha BWS Naked, Yamaha JOG R, Yamaha Zuma 50, and various unlisted makes/models
Item Weight & Product Dimensions:
• 0.295 pounds | 14.665” (L) x 0.653” (W) x 0.354” (D)