Main Menu
Your Cart

TFC Clutch Set (DIO, GET, QMB)

TFC Clutch Set (DIO, GET, QMB)
TFC Clutch Set (DIO, GET, QMB)
TFC Clutch Set (DIO, GET, QMB)
TFC Clutch Set (DIO, GET, QMB)
TFC Clutch Set (DIO, GET, QMB)
TFC Clutch Set (DIO, GET, QMB)

Description: TFC Clutch Set for 139QMB 49cc-50cc 4-stroke GY6 50 engine-based scooters, ATVs, and off-road karts. Also, fit Honda Dio/Elite and Honda GET only with conversion secondary pulley assembly.

NOTE: Will work on Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model ONLY if you use WITH upgrade NCY Pulley Shaft, will NOT work with OEM pulley shaft.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Clutch bell, Clutch housing.

•    1x Clutch Bell (10-Spokes) ID: 107mm / OD: 114.5mm / H: 34.54mm
•    Splines: 22 / ID: 11<12mm / OD: 16.95mm / H: 17.75mm

•    1x Clutch ID: 24<28mm / OD: 104mm / H: 30mm
•    3x 2000rpm Clutch Spring
•    1x Clutch Nut: M28 
•    1x Shaft Nut: M10 
•    Made in Taiwan
•    Fit Socket: 39mm
    Fit Clutch Shaft Nut: M10 / Washer: M10 Socket: 14mm
•    Fit Belt Size: 654669 (Fit DIO ONLY)
•    Fit Belt Size: 660785 (Fit GET ONLY)
•    Fit Belt Size: 669, 729, 788 (Fit QMB ONLY)
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Dowel Pin Set (8x10mm)
•    Fit DIO 49/90cc+
•    Fit GET 49/50cc
•    Fit QMB 49/50cc+

Supported Models: TFC CVT KIT (Part# 179-2); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•   2.58 Pounds | 4.803" (OD) x 4.37" (ID) x 1.496" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
TFC Clutch Set (DIO, GET, QMB)
  • Stock: 40
  • Reward Points: 4
  • Part #: TFC-015
Sold: 0
Views: 527
$103.95
Price in reward points: 104

Included