Bando CVT Belt 781-20-30 Kevlar (Kymco 150)
Description: Bando Brand Premium Kevlar CVT Drive Belt size 781-20-30 is made in Japan, not China's version. Its material used is Aramid aka “Kevlar” which is used in making bullet-proof vests. Aramid characteristics reduce belt stretching and stress that can adversely affect the quality of belt engraving performance while preserving long belt life. Recommend for heavier duty off-road application. CVT Drive Belt size 781-20-30 commonly found on Kymco People 150, Kymco Racing 125, Kymco Agility RS 125, Kymco Agility City 150, Kymco 125 Movie XL '01 and Kymco 150 Movie XL '01.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• Aramid Bullet Proof Vest Reinforced Material
• Length: 781mm (Loop 15.374 in.)
• Width: 20mm (0.787 in.)
• Groove Angle: 30°
• Heat and Oil Resistant
• Made in Japan
• Fit Kymco 125/150+
Supported Models: Kymco People 150, Kymco Racing 125, Kymco Agility RS 125, Kymco Agility City 150, Kymco 125 Movie XL '01 and Kymco 150 Movie XL '01, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.29 pounds | 15.374” (L) x 0.787” (W) x 0.354” (H)