Stage6 CVT Belt R/T Oversize 775-17.8-30 (Minarelli)
Description: Stage6 CVT Belt R/T Oversize 775-17.8-30 for Minarelli 50cc engine. High-quality oversize racing drive belt with kevlar fibers; excellent performance and, thanks to a unique compound, very good grip. This belt has been developed by Stage6 specifically for Oversize CVT systems and is therefore a great upgrade for the Stage6 R/T CVT system, getting you ready for high-speed racing in the circuit as well as sprint races! Excellent results have also been achieved in conjunction with other well-known manufacturers.
NOTE: Only fit with CVT oversize Systems by stage6
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Include the following one belt.
• 1x CVT Belt Oversize
• Nylon Reinforced Material
• Length: 775mm (Loop 30.51in.)
• Top Width: 17.8mm ( 0.70in.)
• Groove Angle: 30º
• Made in Italy
• Fit JOG 50
• Fit QMB 40
Supported Models: 1PE40QMB Minarelli Jog 50cc engines, Various unlisted makes/models
Item Weight & Product Dimensions:
• 0.25 pounds | 15.511” (L) x 0.669” (W) x 0.354” (H)
From Same Category
- Stock: 40
- Reward Points: 2
- Part #: S6-5916627