ComposiMo CVT Cover Spacer Concave Contour (GY6)
Description: Do you have a ComposiMo Anklebiter (or any similar ankle-biter) GY6 CVT open cover on your scooter? Check out these new CVT Cover Spacers! Everyone uses the same boring straight aluminum spacers... but now there are new concave contour spacers, and able to make our CVT cover spacer what we truly want them to look like! Sexy curves! These spacers throw out the old basic straight spacer look, and put in a very stylish concave contour into the spacer to make them stand out more, and have a very custom look to them! Sold individually.
NOTE: Caution must be taken when using this product! This is intended for show purposes/off-road use only, and should not be used on a public road or highway! You are responsible for any damage this product may cause to you personally or any other objects/personal property.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Concave contour spacer.
• 1x Alumin-Silver Concave #6061 Concave Spacers
• Color Option: Black* or Silver
• Made in the U.S.A.
• Fit CVT Cover Anklebitter – shortcase
• Fit CVT Cover Anklebitter – longcase
• Fit 54mm Stud Spacing (A-Block)
• Fit 57mm Stud Spacing (B-Block)
• Fit GY6 125/150cc+
+If selected concave contour spacer can come in gloss black powder coat - not as image color shows; raw silver aluminum.
Supported Models: GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Ruckus, Vento
Item Weight & Package Dimensions:
• 0.1 Pounds | 6" (L) x 4" (W) x 2" (H)