Main Menu
Your Cart

RH Air Intake Tube w/Mesh Filter Kit (Metro, Ruckus)

RH Air Intake Tube w/Mesh Filter Kit (Metro, Ruckus)

Description: RuckHouse Air Intake Tube w/Mesh Filter Kit. Everything you need to eliminate your stock Honda Ruckus and Honda Metropolitan airbox with the most straight air-filter. When you remove your stock airbox you will need to re-jet the carburetor. We recommend you add a performance exhaust at the same time so you are only tuning your carburetor once. 

NOTE: Some tuning required. Jetting may vary depending on altitude, climate, exhaust, type of gas, & other mods. These are the main parts you may need to increase or lower 1 or both of your jet sizes.

Specifications:

Includes the following Intake tube, Carburetor jets, Needle shim, Air filter, Breather filter, and Clamps.

•    1x Intake Rubber Tube w/PVC Fitting L: 209.55mm / ID: 33.45<37.25mm / OD: 41<48mm
•    1x Emgo Cone Mesh Air Filter L: 62.2<80.55mm / ID: 39.5mm / OD: 50mm
•    1x Stainless Steel Clamp-On w/UNI Mesh Breather Filter 1/2" (UP-103)
•    2x Stainless Steel Camp OD: 25<51mm / Clamp OD: 35<60mm 
•    1x Main Jet Size: 85 RPM
•    1x Idle Jet Size: 38 RPM
•    1x Needle Shim (washer) ID: 2.6mm / OD: 6mm / H: 0.63mm
•    Made in the U.S.A.
•    Fit GET 49/50cc

Supported Models: Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.

-----
Item Weight & Package Dimensions:
•   0.806 pounds | 12.5" (L) x 7.75" (W) x 3.5" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
RH Air Intake Tube w/Mesh Filter Kit (Metro, Ruckus)
  • Stock: 39
  • Reward Points: 3
  • Part #: SCT-AER01
Sold: 4
Views: 20888
$93.00
Price in reward points: 93

Included