NCY Throttle Grip 7/8in Aluminum Button Set (GY6, Ruckus, Universal)
Description: These beautiful 22mm Aluminum Grip Sets from NCY come in a variety of colors, so you can express yourself and give your scooter a little color! We brought these in for the Honda Ruckus, but they'll work great on any scooter with 7/8" (22mm) bars. The center has a button design.
NOTE: If throttle cable becomes dry (non-lube). Recommend use lubricating grease, oil, or WD-40 before use. This also helps ease cable friction wear and tear in throttle cable's sleeves, use lubricating tools to help grease where inner throttle sleeve and cable inside line ONLY.
Recommended use hairspray to help ease of rubber grip set slide onto the handlebar left-side and onto the throttle sleeve right-side. Hairspray will allow it to tack dray in minutes, thus allowing grip usage after 10-15 minutes applied. Or if available use an air-compressor wedge open a tiny air pocket in front of the rubber grip while pressing from behind grip to slide onto or off the handlebar and onto or off the throttle sleeve without the use of chemicals.
• Left & Right Grip Set ID: 22mm (7/8”)
• Colors (choose one): Black, Blue, Gold, Orange, Pink, Purple, Red, Silver
• Made in Taiwan
• Fit Handlebar OD: 22mm (7/8”)
• Fit GY6 125/150cc+
• Fit QMB 49/50cc+
• Fit GET 49/50cc+
Supported Models: 139QMB, GY6, Honda Ruckus, Zuma, Rattler, and virtually any other scooter with these handlebar 7/8” measurements.
Item Weight & Product Dimensions:
• 0.3625 pounds | 6.4" (L) x 0.846" (ID) x 2.953" (OD)
People Also Bought
From Same Category
- Stock: 26
- Reward Points: 1
- Part #: 0800-1138